obmp-docker/gobgp/gobgpd.conf

# GoBGP daemon configuration -- OpenBMP "global Internet table" feed (roadmap E1)
#
# Pulls the full real Internet routing table (IPv4 ~1M + IPv6 ~200k routes)
# from Lukasz Bromirski's lab route server (AS57355) and BMP-exports every
# received route to the OpenBMP collector, where it lands in PostgreSQL ip_rib.
# Peering spec: https://lukasz.bromirski.net/post/bgp-w-labie-3/
#
# Receive-only: we announce NOTHING -- AS57355 explicitly asks peers not to
# send prefixes. Local AS is 65001 (the value the route server expects).
# Per the spec: eBGP multihop, no password, keepalive 3600 / hold-time 7200.
# TOML syntax targets GoBGP v3.x / v4.x.

[global]
  [global.config]
    as = 65001
    router-id = "10.40.40.250"
    # We only originate outbound sessions to the route server; disable the
    # inbound BGP listener (port -1) so the daemon needs no privileged
    # (<1024) bind -- required under docker network_mode: host.
    port = -1

# --- Neighbor: route server, IPv4 feed --------------------------------------
# The IPv4 transport session carries the full IPv4 table only.
[[neighbors]]
  [neighbors.config]
    neighbor-address = "85.232.240.179"
    peer-as = 57355
    description = "AS57355 Bromirski lab route-server (IPv4 feed)"
  [neighbors.timers.config]
    keepalive-interval = 3600
    hold-time = 7200
  [neighbors.ebgp-multihop.config]
    enabled = true
    multihop-ttl = 64
  [neighbors.transport.config]
    # we initiate the session; no local-address pinning
    passive-mode = false
  [[neighbors.afi-safis]]
    [neighbors.afi-safis.config]
      afi-safi-name = "ipv4-unicast"

# --- Neighbor: route server, IPv6 feed --------------------------------------
# The IPv6 transport session carries the full IPv6 table only.
[[neighbors]]
  [neighbors.config]
    neighbor-address = "2001:1a68:2c:2::179"
    peer-as = 57355
    description = "AS57355 Bromirski lab route-server (IPv6 feed)"
  [neighbors.timers.config]
    keepalive-interval = 3600
    hold-time = 7200
  [neighbors.ebgp-multihop.config]
    enabled = true
    multihop-ttl = 64
  [neighbors.transport.config]
    passive-mode = false
  [[neighbors.afi-safis]]
    [neighbors.afi-safis.config]
      afi-safi-name = "ipv6-unicast"

# --- BMP export to the OpenBMP collector ------------------------------------
# GoBGP connects OUT to the collector. GoBGP's BMP config requires a literal
# IP (it cannot resolve a hostname), so we target the docker host IP where the
# collector publishes port 5000 -- stable across container recreation, unlike
# the collector's internal docker IP. Matches HOST_IP in .env.
# route-monitoring-policy = "pre-policy" exports the Adj-RIB-In (received
# routes, pre import-policy) -- consistent with the rest of the OpenBMP fleet.
[[bmp-servers]]
  [bmp-servers.config]
    address = "10.40.40.202"
    port = 5000
    route-monitoring-policy = "pre-policy"
    statistics-timeout = 3600