Policy Diff (roadmap E2 follow-up): obmp-rib-poller pulls per-router
post-policy accepted/advertised prefix counts and route-policy bindings
over CLI+NETCONF (BMP on XRv9000 24.3.1 carries only pre-policy
Adj-RIB-In). New tables in 008_obmp_policy_diff.sql; Policy Diff
dashboard joins them against BMP ip_rib for received-vs-kept-vs-rejected.
GoBGP fleet-wide feed: GoBGP re-advertises the full Bromirski table to
both labs' core routers (CML AS65020, PROX AS65021) over eBGP; as route
reflectors the cores propagate it to every R9K client, so all 18 lab
routers carry and BMP-export a full table -- an intentional stress test
of the ingestion/storage path. cml/gobgp_peering_config.py applies and
rolls back the core-side config; gobgp/README.md documents the rollback.
Kafka lag monitoring: kafka-lag-monitor samples consumer-group lag every
30s into TimescaleDB (009_kafka_lag.sql); Kafka Ingestion Lag dashboard
gives visibility into the pipeline under churn load.
Peer Detail dashboard: the Peer selector is now router-qualified
(router -> peer) so it is unambiguous in an iBGP route-reflector mesh.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Visualises BGP EVPN routes from evpn_rib: route counts and EVIs,
route-type breakdown, a per-EVI summary, and detail tables for type-2
MAC/IP advertisements (MAC, host IP, VNI/label, route-targets, ESI)
and type-3 inclusive-multicast routes. Scoped by an RD/EVI variable.
Lives in the OBMP-L3VPN folder.
Completes roadmap E5's lab-testable scope: evpn_rib table, gobgp-evpn
injector, obmp-evpn-consumer, and this dashboard — verified end to
end with synthetic type-2/type-3 routes.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Both L3VPN dashboards had a static custom 'rd' variable holding only
the '-' (all) sentinel — you could not actually filter by a VRF.
Convert 'rd' to a query variable that discovers route distinguishers
from l3vpn_rib. Degrades cleanly on the (currently empty) lab table:
the query always returns '-', so behaviour is unchanged until real
L3VPN data exists, then RDs auto-populate. Existing panel SQL
('$rd' = '-' OR rd = '$rd') is untouched.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Explores the real DFZ table received from the AS57355 route server
via the GoBGP feed (the '$feed' / GoBGP BMP peer): IPv4/IPv6 prefix
counts, distinct origin ASes, prefix-length distribution, top origin
ASes by prefix count, and an overlap-based prefix lookup. Serves as
the comparison baseline for the Router Diff dashboard.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Generalizes the RR-specific RR Loc-RIB Diff into a comparison of up
to four selectable routers. router1/router2 are required; router3/
router4 default to a '-- none --' sentinel and drop cleanly out of
every query (no empty-IN, no dangling predicates).
Panels: per-router prefix counts, divergent-prefix count, a presence
matrix (row per prefix, column per router, cell = best-path next-hop),
a divergence detail table classifying missing / next-hop / AS-path
disagreement, and a per-prefix all-paths drill-down. Once the GoBGP
global feed (E1) is up, GLOBAL-FEED is selectable as any of the four
for lab-vs-Internet diffing.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The AS map previously exploded ~4.4M base_attrs AS_PATH rows live,
three times per load (one per panel), ~1.8s each — slow enough that
navigating away cancelled the queries mid-flight.
Add mv_as_adjacency: undirected consecutive-AS pairs with occurrence
counts over the full RIB (17k rows), refreshed hourly by pg_cron via
REFRESH ... CONCURRENTLY. The dashboard panels now read the view in
~1ms. Min-occurrence options rescaled for full-RIB counts
(2000/5000/10000/50000, default 2000 -> ~63-node graph).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The node graph rendered blank because the two CML/PROX labs formed
two disconnected components (iBGP-only meshes within each lab), and
Grafana's nodeGraph layout renders nothing for a disconnected graph.
Match BGP sessions to monitored routers by peer IP as well as peer
BGP-ID, so the real cross-lab eBGP sessions become graph edges. The
graph is now one connected component (30 iBGP + 4 eBGP edges) and
lays out. The companion external-neighbours table uses the same
peer-IP check so those sessions are no longer double-listed.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The node graph rendered empty because the edges target returned a
string mainstat ('iBGP'/'eBGP'). Grafana's nodeGraph treats edge
mainStat as numeric for layout/labelling; a string value silently
breaks the layout so no nodes are drawn (the working LS map and the
original ls_topo both cast edge mainstat to an integer).
Edge mainstat is now COUNT(DISTINCT feed)::int (BMP peer-feed count
for the router pair); the iBGP/eBGP label moves to secondarystat and
detail__session_type, which accept strings.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Switch the route-reflector membership test to
= ANY(ARRAY[${rr_loopbacks:singlequote}]::text[]) — the singlequote
format is the one already proven to interpolate correctly in this
Grafana instance (rr_locrib_diff uses it), and the ARRAY[...]::text[]
wrapper stays valid (empty array) when the variable resolves empty.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The protocol variable has includeAll enabled, so Grafana auto-quotes
its value ('IS-IS_L2'); the SQL then wrapped it again, producing
''IS-IS_L2'' and a syntax error that blanked the node graph. Replace
the quoted equality filter with IN ($protocol) — Grafana already
emits a quoted CSV — and make the variable multi-select so "All"
expands cleanly.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When the rr_loopbacks variable resolved empty, the IN
(${rr_loopbacks:singlequote}) clause expanded to IN (), a SQL
syntax error that blanked the topology panel. Switch to
= ANY(string_to_array('${rr_loopbacks:csv}', ',')), which yields
a no-match (not a syntax error) on an empty variable.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Create a new OBMP-Maps Grafana folder (folderUid 1006) with four
data-visualization dashboards built on nodeGraph and geomap panels:
- BGP Peer Map: routers as nodes, BGP sessions as edges; iBGP/eBGP
edge typing and operator-editable rr_loopbacks variable to denote
route reflectors; companion table for sessions to non-monitored
neighbours.
- IGP / Link-State Topology Map: reworked from LinkState-1004 and
moved here (uid preserved); scoped by peer feed / protocol / AS so
the 489-node BGP-LS topology stays readable; SR-capability rings.
- AS Relationship Map: AS adjacency graph from consecutive AS_PATH
pairs over a 200k-route sample; min-occurrence and focus-AS
variables; nodes enriched from info_asn whois.
- Geographic Prefix Map: geomap of RIB prefixes and origin ASes by
IP geolocation, with a note that lab 10.x loopbacks do not
geolocate; bounded geo_ip join via a sample-size variable.
Also add a data link on the Looking Glass ASN Info panel's origin_as
column that jumps to the ASN View dashboard scoped to that AS.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
asn_num was a fixed custom variable; converting it to a textbox lets an
operator look up any origin AS and see all of its RIB prefixes, upstreams,
and downstreams.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Reorganizes 31 dashboards into an operator-first structure with real
navigation. Adds Router Detail and Peer Detail drilldown dashboards; merges
LS Nodes+Links and the two L3VPN dashboards; modernizes all deprecated panels
(table-old/graph/worldmap). Every dashboard gets the obmp-nav dropdown so the
whole set is reachable from anywhere. Graduates the operational "Learning"
dashboards into Operations/Routing/LinkState folders, retires the Tops folder,
and relabels folders (Base->Operations, History->Routing, Learning->Reference).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
IOS-XR 9000v in CML uses igp_metric=16000000 on all IS-IS links.
The stock dashboard filter (< 16000000) excluded all links, making
the Node dropdown empty and topology panel show no data. Changed
to <= 16777215 (IS-IS wide metric max) so lab links are included.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
