! ============================================================================
! role-route-reflector.cfg  --  RR-specific overlay for CORE routers
! ============================================================================
! Apply ONLY on routers that act as iBGP route reflectors for their AS.
! Skip on the client routers -- there this overlay is a no-op at best and
! creates inadvertent reflection at worst.
!
! Complements 01-bmp-basic.cfg (defines the BMP-MONITORED neighbor-group)
! and 02-bgp-ls.cfg (which activates the LS AF toward peers). The
! RR-specific bit here is `route-reflector-client` under the AFs for
! every client neighbor.
!
! Two conventions worth preserving:
!   - Put every RR client into a `RR-CLIENT` neighbor-group so the
!     reflector attribute is set once at group scope.
!   - Combine with BMP-MONITORED via `use neighbor-group` at the neighbor
!     itself -- IOS-XR only allows one `use neighbor-group` per neighbor,
!     so nest common bits by inheritance if you need multiple groups.
! ============================================================================

router bgp <LOCAL_ASN>
 !
 ! Cluster-id -- set to the RR's loopback so RR<->RR pairs recognize each
 ! other's reflected routes and don't loop. Both RRs in a pair share the
 ! same cluster-id if you want them to act as a single logical RR.
 bgp cluster-id <ROUTER_LOOPBACK>
 !
 ! RR-CLIENT neighbor-group: applied to every iBGP client peer.
 neighbor-group RR-CLIENT
  remote-as <LOCAL_ASN>
  update-source Loopback0
  bmp-activate server 1
  address-family ipv4 unicast
   route-reflector-client
   next-hop-self
  !
  address-family link-state link-state
   route-reflector-client
  !
 !
!

! Per-client wiring (repeat per client, replacing <CLIENT_LOOPBACK>):
!
!   router bgp <LOCAL_ASN>
!    neighbor <CLIENT_LOOPBACK>
!     use neighbor-group RR-CLIENT
!    !
!   !

! --- Verify -----------------------------------------------------------------
!   show bgp neighbors <CLIENT_LOOPBACK> | include Route-Reflector
!   show bgp summary                       ! all clients Established
!   show bgp neighbors <CLIENT_LOOPBACK> advertised-routes | count
!
! On the stack side (once the routers are BMP-reporting and reflecting):
!   Grafana -> OBMP-Learning -> RR Loc-RIB Diff  (should populate)